{"id":1452,"date":"2020-05-30T10:53:54","date_gmt":"2020-05-30T10:53:54","guid":{"rendered":"http:\/\/www.scavengers.club\/?p=1452"},"modified":"2020-06-01T23:50:33","modified_gmt":"2020-06-01T23:50:33","slug":"here-we-go-again","status":"publish","type":"post","link":"http:\/\/www.scavengers.club\/?p=1452","title":{"rendered":"Here we go again.."},"content":{"rendered":"\n

So, sometime ago whilst chewing the fat with Mac, probably half cut, there was talk of maybe starting a new project, this time I wanted to do something different. It must have suspension this time as my back is aging quicker than me, something comfy, cool to look at (do we even say cool anymore or was that an 80\u2019s thing I forgot to drop..? man..) and more of an off-road twist <\/p>\n\n\n\n

There was a sniff of a project coming available from an old friend of Mac\u2019s, quite a reliable chap that doesn\u2019t ask the earth for anything either, the details were vague but we knew it was a big single pot trail bike from the 80\u2019s, mostly complete and with a log book! That ticks all the boxes I need but I was pretty skint at the time so had to back out although I was really keen.<\/p>\n\n\n\n

Sometime later whilst perusing Mac\u2019s vast warehouse of motorcycle madness he took me to a dark corner on one of the lower floors, took a key from around his neck and opened a small side door and lead me in to the \u2018New projects store room\u2019 There it was, a Yammy XT600, well most of it, the good bits! A few months later when finances were easier it was mine! Thank you \u2018Bank of Mac\u2019, very much appreciated.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

There is an engine, forks, front wheel and a box of bits also, quite a few bits missing but the way I\u2019m seeing it is they were parts that would have been replaced anyway. A previous owner has had a go at changing the look of the bike by removing the tail section to remodel it, I think they were going for a cafe racer style but that\u2019s not what I\u2019m doing so I\u2019ll just chop it off.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

I should point out this is a couple of weeks in to Covid 19 lockdown so getting hold of parts will be tricky but not as tricky as getting hold of bogroll for some unknown reason.. Rumour has it Mac knows a man, he can get Andrex triple ply, it\u2019s not what you know.. A quick slice later and the cafe racer mod is gone, engine\/swing arm are bolted in, I don\u2019t have a back wheel\u2026I\u2019ll have a look around my parts to see what might fit.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

I could not find a normal back wheel but I found a back wheel in a single sided swing arm from a Honda Bros 400 also from the 80\u2019s or 90\u2019s..? It does not even close to fit, it\u2019s wider and offset and does not sit central, might as well be from a different bike. I am going to need to remove more frame to get this to fit.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

So I have removed more frame, I’m sure I’m going to lose both of these down tubes completely but I’m leaving them there for now. Time to try a fit with the swing arm and see just how far out we are..<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

That looks hopeful, the swing arm spindle is the right size, it fits through the back of the engine fine and I can make the frame to suit, time to try the suspension unit for ride height.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Now I’m not a pro at this game but I’m pretty sure the rear wheel needs to be lower than the handle bars so I suspect the suspension unit either needs to be longer or drasticly move the top mount, I’ll phone Mac and see what he has in stock.<\/p>\n\n\n\n

Turns out Mac has ordered the house staff (not allowed to call them servants) to draw him a body temperature bath of goats milk and has ordered 12 punkah wallah’s to circle him whilst he watches close up images of Harley Davidsons on his 50 inch flat screen held by 2 Telly wallah’s, so no he cant answer the phone right now so I’ll move on to spacing the swing arm instead.<\/p>\n\n\n\n

One of the issues I’m having is the offset between the centre of the bike relevant to the drive chain, if I move the swing arm to a place where the sprockets line up it means the rear wheel will track 18mm to the right so it is no longer following the front wheel, ideally I want the rear wheel to track exactly behing the front and I want the sprockets to line up, I forgot to get a picture of this but if you bolt the sprocket on the wrong side of the carrier and make a 5mm spacer to go between the carrier and the bearing it’s close enough, just make spacers to suit the swing arm at the pivot and we are getting closer!<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Now I have the sprockets and both wheels in line I’ll jack it up on the jig I made (\u00a340) and work out how the new frame will accomodate the mounting points for both swing arm and foot pegs.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

As you can see here the bottom mount\/footpeg hanger is no where near wide enough, if I join a tube here it would foul the swing arm, see centre screen, this should be a one inch tube housing a gusset that accepts the swing arm mount and then attaching to the spine. (big frame tube under the tank) This needs to be at least 25mm wider, maybe more..?<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

I need enough sticking out either side to attach the frame to the spine, it’s just not enough.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

I’m not going to be able to make much use out of this, I could cut and extend it but that seems a bit of a bodge, I have an idea!<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

I’ll cut off the mounts and footpeg hangers, I’ve got some 32mm cold drawn tube from an earlier build so I’ll make a new’un.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

I’m going to play it clever and make the tube an over an inch too long on each end so I can concentrate on making the swing arm and frame mounts, plenty left over to stick the foot pegs on with, well thats the plan.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

There we have it, the tube is now tacked to the mounts and is in place but I have just realised I need to switch back to mounting the rear shock absorber as any alteration I make up top will affect how much room I have to mount these up tubes from the swing arm, Mac had at some point finished his milk bath and dropped off a longer shocker but it’s still to short!<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

The bottom mount needed a bush making as the original bolt from the Bros was too skinny, easy fix. The top mount is entirely a guess and may need changing, I chose this possition for what looks a good ride height but as I don’t have a front end yet one could argue my calculations, I’ll try this and if it’s wrong I’ll fix it.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

The bottom mount on the single sided swing arm is off set to the left a bit, the top mount on the bike is in the middle so I have moved it around to suit, looks wrong but it needs to be like this. This unit used to run with rockers on the bottom mount but is now going to be mounted direct so maybe to stiff to use like this, we will see.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Next job is to make the up tubes and join the bottom mount through the swing arm mount to the spine, lots of bends, I’m using inch tube with 1\/8th wall and making the bends with my ebay bender (\u00a3270), it bends with brute force and a little luck.. (I bought plenty of tube to play with).<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

So there you have it! First side done and tacked in place including a gusset, these are very tricky to make and the skill takes years to master.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Or you could rip a bit off a box and draw round the tube with a sharpie, like I do.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Footpeg mount tacked back in place, also mounts the stand.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Also mounted is the right footpeg, this is also mixed up with the rear brake, it was drum braked but now I have a disc so this is pushed to the back burner for now, I have bought a second hand master cylinder\/pot from a xl650 Transalp, I took some measurements and worked out this was the cheapest one I could find so it would be a good fit. As it happens Mac has a contact not far away that makes hoses and are happy to play silly buggers so I’ll let them worry about the plumbing.
<\/p>\n","protected":false},"excerpt":{"rendered":"

So, sometime ago whilst chewing the fat with Mac, probably half cut, there was talk of maybe starting a new project, this time I wanted to do something different. It must have suspension this time as my back is aging quicker than me, something comfy, cool to look at (do Read More…<\/a><\/p>\n","protected":false},"author":4,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[2],"tags":[],"jetpack_featured_media_url":"","_links":{"self":[{"href":"http:\/\/www.scavengers.club\/index.php?rest_route=\/wp\/v2\/posts\/1452"}],"collection":[{"href":"http:\/\/www.scavengers.club\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.scavengers.club\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.scavengers.club\/index.php?rest_route=\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"http:\/\/www.scavengers.club\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1452"}],"version-history":[{"count":4,"href":"http:\/\/www.scavengers.club\/index.php?rest_route=\/wp\/v2\/posts\/1452\/revisions"}],"predecessor-version":[{"id":1480,"href":"http:\/\/www.scavengers.club\/index.php?rest_route=\/wp\/v2\/posts\/1452\/revisions\/1480"}],"wp:attachment":[{"href":"http:\/\/www.scavengers.club\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1452"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.scavengers.club\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1452"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.scavengers.club\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1452"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}